- Inhibited Mineral Oils Oxidation Characteristics Tester BLS-943
- 【Brief】：The instrument complies with ASTM D943 and GB/T 12581.
- 【Series】：Lube Oil Testers
Application
The BLS-943 is designed and manufactured according to the requirements of ASTM D943 and the petroleum standard GB/T 12581 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils. It is suitable for the determination of turbine oil. It is also suitable for other types of oils, such as circulating oil and hydraulic oil, which are less dense than water and contain anti-rust additives and anti-oxidant additives.
Structure and Features
The instrument consists of 7-hole oil bath, stainless steel upper cover, 7 flow meters, intelligent digital display temperature control, electric heating device and single-chip timer. It has fast heating speed, good thermostatic effect, high heat preservation efficiency and intuitive operation. It is simple to operate with long service life. it is an ideal laboratory measurement equipment.
Main Technical Parameters
|
Power supply |
220V AC ± 10%, 50Hz(customizable) |
|
Heating power |
2000W |
|
Oil bath temperature control range |
Room temperature ~ 200℃, test temperature: 95 ± 0.2℃ |
|
Temperature control accuracy |
±0.2℃ |
|
Number of oil bath hole |
7,of which 6 holes for test, 1 for temperature measurement |
|
Number of oxidation tubes can be installed |
7 pieces, including 6 pieces for test and 1 piece for temperature measurement. |
|
Flow meter |
7 pieces, 6 ~ 60ml / min oxygen flowmeter |
|
Temperature sensor |
Pt100, platinum thermal resistance |
|
Ambient temperature |
0～40℃ |
|
Relative humidity |
30～80% |
QR Code